Prices

TN# 0600 vga 1/4
Core ClearNav System basic

Outside dimensions: 145mmx118mmx27mm.  320x240 pixel, Weight: 480g

Complete for Installation onto the instrument panel. Includes the ClearNav, the handheld remote module, GPS antenna, Nexus Basic - module to connect all cables, the required cables, USB / Remote extension for on-panel mount, templates for easy mounting and layout, USB stick with Software, and the documentation.

The ClearNav (CN) has a built-in FAI Flight Recorder, the flight transfer via the USB stick. CN memory contains the total terrain of Europe and the Glide Navigator III (GNIII) program. Worldwide gliding area data are available. The airspace and Waypoint mod's can be loaded in several formats, and the special Flight Waypoint files in .dat Format. Powerful memory and a fast reliable Processor of latest design drive the high quality colour screen of 51/2" (87x115mm). A backlight "power safe" modus controls power consumption of 140 to max. 600mA. Excellent sharp screen visibility even in strong sunlight.

1.930,00

TN# 0600vga ClearNav System

as above, with full VGA screen with 640 x 480 Pixel

 2.080,00

ClearNav  Options:

TN #612/**0615
Remote control mounted into the stick handle.                                     

With integrated remote Module and PTT pushbutton. Connected with a 4 wire RJ10 flat cable and 2 wires for the PTT pushbutton.

• 16mm as Antares                      
• 19mm as SHK Schempp-Hirth
• 18mm as DG and LS
• AS Schleicher special 24/18 and
• JS1
• 20mm as Glasflügel and HPH  
• 24mm as AS Schleicher standard
• Special stick sizes and shapes on demand. 

Type of wood: Mahogany, cherry, pear, chestnut, plum;elm. The handle is handcrafted. Standard – finish: Natural hardwax..

319,00

Mounting kit for assembly flat into the instrument panel.                         

Panel cut out is for full CN frame size. Details: 

• narrow front frame in black anodized  Aluminium with standoffs and support bracket for the CN.
• Outside dimensions are 161mmx123mm.
• 4 holes (M3) in distance 116mm x 104mm for standoffs. 70g.

47,00

TN #0631 /C1 or C2, or C4 
Mounting bracket for assembly behind the panel

Version C1 or C2. This bracket has 8 fastening latches, 4 of them can be removed when the space distribution in the panel layout is clear. This version requires a cut out only for the display itself. With standoffs M3x28mm, and a template set (on loan) for accurate drilling and cutting.  

TN #0634 "Tunnel mount Metal or GRP/CRP"

The CN mounted into a recess slot, 25 or 40mm inside the panel surface. Brings more visibility in sunlight, and protects the screen. Made of aluminium; screw on type in parts.

Or made of GRP fibreglass, integrated with resin into the i-panel on request (4 models, also tilted 15°). For this best solution we have to discuss the panel situation first, saves space for a tight instrument layout. We have moulds for many panels.

105,00

 90,00

Assembly outside the instrument panel: 
TN #0632 „RAM Mount NK“

• double hinged sturdy holder with ball type hinges, clamped
• For side mount fastened on the panel or cockpit side wall
• Two 25mm clamping balls with wing nuts to adjust. Comes with a holding base plate for fastening, and panel support pads.
• Height 100mm; Weight 250g, black surface.
• RAM and stalk mounts require the connecting cable # 645 to the Nexus Board, which is mounted behind the  panel

• with rigid stalk (gooseneck type) in length 100 or 150mm,
• ends on the CN with a Holding plate that includes a 90° hinge in order to swing the CN to the side when entering the cockpit, or give the view to other instruments such as the engine control unit.
• Connects with a thread M10x 1mm.
• Weight: 150g.
• Without the 90° tilt hinge, stalk and mount plate

 93,00

95,00

32,00 

70,00 

68,00

15,00

TN # 0641 Nexus Board  for Cable connections
Compact Unit as terminal for all cables (Except the GPS cable). CAN – Bus and serial RJ22 connector, 15 wire connector for remote NC location, 12 Volt connector; SUA Warning speaker. Weight: 71g. Size: 95x60mm x 30mm high + Connector couplings.
 

170,00

TN # 0651 CANbus/USB Cable

with couplings for the USB device and the handheld remote pad. Requires a round cut of 25mm OD into the panel. Placed best on the lower side of the panel, or to  the cockpit sidewall. Weight: 50g. Size: 26x28mm; 20mm deep.

81,00

TN # 1424  Connector Terminal Block
(12Volt; 4 positions to connect outside the plane)

USB Stick 2 GB
with latest Software and Map Data

 8,00

13,00